3M Valved N95 Respirators 8112 with FDA CE

Dimension: Cup shaped

Model: 8112

EN149+A1 Classification: FFP1 NR D

Exhalation Valve: Valved

Threshold Limit Value, TLV: 4

Weight: 13g

Package: 10 pc/ box, 24 boxes/ carton

Straps: Polyisoprene

Staples: Steel

Nose Clip: Steel

Nose Foam: Polyurethane

Filter: Polypropylene/Polyester

Valve: Polypropylene

Valve diaphragm: Polyisoprene

Tested and CE Approved to EN 149:2001+A1:2009

Traditional convex shape, with nose clip and twin strap design

Durable, collapse resistant inner shell

Reliable, effective protection against fine particles

Advanced Electret Filter Material gives effective filtration with low breathing resistance for high quality perfomance

1. Cup respirator in one hand with nosepiece at fingertips, allow headbands to hang freely below hand.

2. Hold respirator under chin, with nosepiece up.

3. Locate the upper strap across the crown of the head and the lower strap below the ears.

4. Straps must not be twisted.

5. Using both hands, mould noseclip to the shape of the lower part of the nose to ensure a close fit and good seal. Pinching the noseclip using only one hand may result in less effective respirator performance.

6. The seal of the respirator on the face should be fit-checked before entering the workplace.